Two-door short-wheelbase four-wheel-drive wagon · 302 cu. in. V8
1977 Ford Bronco Sport Bronco, 302 cu. in. V8, three-speed manual
The Sport Bronco paired the now-standard 302-cubic-inch V8 with Ford's synchronized three-speed manual.

Photo: “1977 Ford Bronco (51839345395).jpg” by Eric Friedebach / Wikimedia Commons, licensed under CC BY 2.0. Cropped to 16:9.
Factory configuration
What this model is
- Trim
- Sport Bronco
- Body style
- Two-door short-wheelbase four-wheel-drive wagon
- Engine
- 302 cu. in. V8
- Transmission
- Three-speed fully synchronized manual
Ranger is documented as an optional package, not a separate model.
Configuration-specific ownership
Maintenance for this exact configuration
These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.
Service desk
What this car needs & when
Use this as a service-planning checklist for 1977 Ford Bronco Sport Bronco, 302 cu. in. V8, three-speed manual. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.
- Service topics
- 3
- Factory intervals
- 3
- Fitment-scoped
- 3
- Exact references
- 1
Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.
Engine oil and filter
Exact reference available
Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed pages 38–39 — 1975–77, 5 months/5,000 miles: crankcase, change oil and filter · checked
1977 cataloged Bronco engines
K&N HP-3001
Source: K&N — Ford Bronco replacement oil-filter catalog · 1977 Ford Bronco engine application rows — HP-3001 · checked
Verified ordering references
- Service replacementK&N HP-3001
Qty. 1 · Spin-on engine oil filter · catalog-listed
K&N's manufacturer catalog lists HP-3001 for the 1977 Bronco 302 cu. in. V8 application. Confirm the installed engine before ordering.
Catalog: K&N — Ford Bronco replacement oil-filter catalog · 1977 Ford Bronco 302 cu. in. V8 oil-filter application — HP-3001 · checked
Search this part on Amazon
Engine coolant — drain, flush and replace
Sourced interval available
Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 39 — every 24 months: change coolant and flush · checked
Brake and front-wheel-bearing service
Sourced interval available
Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 39 — 20 months/20,000 miles brake and front-wheel-bearing rows · checked
Sources
Other 1977 configurations