Car Model History

Two-door short-wheelbase four-wheel-drive wagon · 302 cu. in. V8

1977 Ford Bronco, 302 cu. in. V8, SelectShift automatic

The Bronco combined the standard 302-cubic-inch V8 with Ford's optional SelectShift Cruise-O-Matic.

1977 Ford Bronco, final first-generation compact 4x4 — front three-quarter view
Exact 1977 Bronco reference photograph; exact configuration not verified ·

Photo: “1977 Ford Bronco (51839345395).jpg” by Eric Friedebach / Wikimedia Commons, licensed under CC BY 2.0. Cropped to 16:9.

Factory configuration

What this model is

Trim
Bronco
Body style
Two-door short-wheelbase four-wheel-drive wagon
Engine
302 cu. in. V8
Transmission
SelectShift Cruise-O-Matic automatic

The factory literature lists no six-cylinder engine for this model year.

Compare related 1977 configurations

Compare up to twelve documented pairings, prioritizing the same engine, body, trim and gearbox as this car. This related selection is not a complete factory lineup.

Browse all documented 1977 configurations →

Compare 4 related configurations — current car marked
1977 Ford Bronco: documented configuration differences
ConfigurationEngineTransmissionBody
Bronco, 302 cu. in. V8, three-speed manual302 cu. in. V8Three-speed fully synchronized manualTwo-door short-wheelbase four-wheel-drive wagon
Current carBronco, 302 cu. in. V8, SelectShift automatic302 cu. in. V8SelectShift Cruise-O-Matic automaticTwo-door short-wheelbase four-wheel-drive wagon
Sport Bronco, 302 cu. in. V8, three-speed manual302 cu. in. V8Three-speed fully synchronized manualTwo-door short-wheelbase four-wheel-drive wagon
Sport Bronco, 302 cu. in. V8, SelectShift automatic302 cu. in. V8SelectShift Cruise-O-Matic automaticTwo-door short-wheelbase four-wheel-drive wagon

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service desk

What this car needs & when

Use this as a service-planning checklist for 1977 Ford Bronco, 302 cu. in. V8, SelectShift automatic. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.

Service topics
3
Scheduled topics
3
Applicability stated
3
Exact references
1

Before ordering Identify your engine, options and build date. Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

  • Engine oil and filterView intervals, applicability and sources

    Engine oil and filter

    Exact reference available

    Applies to: 1977 · United States · Exact 1977 inclusion in Chilton's printed 1975–1977 Bronco maintenance band; this is a period secondary compilation acknowledged as based on Ford information.

    Published interval: 5,000 mi / 8,000 km / 5 months · Whichever comes first.

    Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed pages 38–39 — 1975–77, 5 months/5,000 miles: crankcase, change oil and filter · checked

    1977 cataloged Bronco engines

    K&N HP-3001

    Applies to: 1977 · 302 cu. in. V8 · United States

    Source: K&N — Ford Bronco replacement oil-filter catalog · 1977 Ford Bronco engine application rows — HP-3001 · checked

    Verified ordering references

    • Service replacementK&N HP-3001

      Qty. 1 · Spin-on engine oil filter · catalog-listed

      K&N's manufacturer catalog lists HP-3001 for the 1977 Bronco 302 cu. in. V8 application. Confirm the installed engine before ordering.

      Catalog: K&N — Ford Bronco replacement oil-filter catalog · 1977 Ford Bronco 302 cu. in. V8 oil-filter application — HP-3001 · checked

      Search this part on Amazon
  • Engine coolant — drain, flush and replaceView intervals, applicability and sources

    Engine coolant — drain, flush and replace

    Sourced interval available

    Applies to: 1977 · United States · Exact 1977 inclusion in Chilton's printed 1975–1977 Bronco maintenance band; this is a period secondary compilation acknowledged as based on Ford information.

    Published interval: 24 months · Published 1975–1977 elapsed-time interval.

    Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 39 — every 24 months: change coolant and flush · checked

  • Brake and front-wheel-bearing serviceView intervals, applicability and sources

    Brake and front-wheel-bearing service

    Sourced interval available

    Applies to: 1977 · United States · Exact 1977 inclusion in Chilton's printed 1975–1977 Bronco maintenance band; this is a period secondary compilation acknowledged as based on Ford information.

    Published interval: 20,000 mi / 32,000 km / 20 months · Inspect brakes; clean and repack front wheel bearings.

    Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 39 — 20 months/20,000 miles brake and front-wheel-bearing rows · checked

Search results may cover different scales, trims and model years. Check each listing; this search does not establish an exact replica of the documented vehicle.

Sources

  1. Ford — 1977 Bronco factory brochure

Other 1977 configurations

Filter documented 1977 configurations →