Short-roof two-door utility · 170 cu. in. inline-six

1967 Ford Bronco Sports Utility, 170 cu. in. six, three-speed manual

The Bronco Sports Utility used Ford's standard 170-cubic-inch inline-six and synchronized three-speed manual transmission.

Exact 1967 Bronco reference photograph; exact configuration not verified ·

Photo: “1967 Ford Bronco (53933420059).jpg” by Mustang Joe / Wikimedia Commons — CC0 1.0. Cropped to 16:9.

Factory configuration

What this model is

Trim: Bronco Sports Utility
Body style: Short-roof two-door utility
Engine: 170 cu. in. inline-six
Transmission: Three-speed fully synchronized manual

Ford's January 1967 brochure lists the 289 V8 as the sole optional engine and identifies only the synchronized three-speed transmission.

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service topics: 2
Factory intervals: 2
Fitment-scoped: 2
Exact references: 1

Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

Engine oil and filter
Exact reference available
Applies to: 1967 · United States · Chilton's 1981 Bronco guide prints this cadence for the 1966–1972 model-year band. It is a period secondary compilation acknowledged as based on Ford information, not a substitute for an exact vehicle's original owner literature.
Published interval: 6,000 mi / 9,600 km / 6 months · Published 1966–1972 preventive-maintenance interval; whichever comes first.
Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 37 — 1966–72, 6 months/6,000 miles: crankcase, change oil and filter · checked 2026-08-24
1967 cataloged Bronco engines
K&N HP-3001
Applies to: 1967 · 170 cu. in. inline-six, 289 cu. in. V8 · United States
Source: K&N — Ford Bronco replacement oil-filter catalog · 1967 Ford Bronco engine application rows — HP-3001 · checked 2026-09-01
Verified ordering references
- Service replacementK&N HP-3001
  Qty. 1 · Spin-on engine oil filter · catalog-listed
  K&N's manufacturer catalog lists HP-3001 for the 1967 Bronco 170 cu. in. inline-six or 289 cu. in. V8 application. Confirm the installed engine before ordering.
  Catalog: K&N — Ford Bronco replacement oil-filter catalog · 1967 Ford Bronco 170 cu. in. inline-six or 289 cu. in. V8 oil-filter application — HP-3001 · checked 2026-09-01
  Search this part on Amazon
Chassis and driveline lubrication and level checks
Sourced interval available
Applies to: 1967 · United States · Chilton's 1981 Bronco guide prints this cadence for the 1966–1972 model-year band. It is a period secondary compilation acknowledged as based on Ford information, not a substitute for an exact vehicle's original owner literature.
Published interval: 6,000 mi / 9,600 km / 6 months · Centering yoke, steering linkage, U-joints and splines, with differential, transfer-case and transmission checks as equipped.
Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 37 — 1966–72, 6 months/6,000 miles chassis/driveline rows · checked 2026-08-24

Sources

Ford — 1967 Bronco factory brochure (FDT 6711)

Other 1967 configurations

Filter all 1967 configurations →