Car Model History

Open roadster without roof or doors · 289 cu. in. V8

1967 Ford Bronco Roadster, 289 cu. in. V8, three-speed manual

The Bronco Roadster could substitute Ford's optional 289-cubic-inch V8 while retaining the synchronized three-speed manual transmission.

1967 Ford Bronco, first-generation compact 4x4 — front three-quarter view
Exact 1967 Bronco reference photograph; exact configuration not verified ·

Photo: “1967 Ford Bronco (53933420059).jpg” by Mustang Joe / Wikimedia Commons — CC0 1.0. Cropped to 16:9.

Factory configuration

What this model is

Trim
Bronco Roadster
Body style
Open roadster without roof or doors
Engine
289 cu. in. V8
Transmission
Three-speed fully synchronized manual

The factory equipment table applies the optional 289 V8 to the Bronco line and does not list an automatic transmission.

Compare related 1967 configurations

Compare up to twelve documented pairings, prioritizing the same engine, body, trim and gearbox as this car. This related selection is not a complete factory lineup.

Browse all documented 1967 configurations →

Compare 6 related configurations — current car marked
1967 Ford Bronco: documented configuration differences
ConfigurationEngineTransmissionBody
Bronco Roadster, 170 cu. in. six, three-speed manual170 cu. in. inline-sixThree-speed fully synchronized manualOpen roadster without roof or doors
Current carBronco Roadster, 289 cu. in. V8, three-speed manual289 cu. in. V8Three-speed fully synchronized manualOpen roadster without roof or doors
Bronco Sports Utility, 170 cu. in. six, three-speed manual170 cu. in. inline-sixThree-speed fully synchronized manualShort-roof two-door utility
Bronco Sports Utility, 289 cu. in. V8, three-speed manual289 cu. in. V8Three-speed fully synchronized manualShort-roof two-door utility
Bronco Wagon, 170 cu. in. six, three-speed manual170 cu. in. inline-sixThree-speed fully synchronized manualFull-roof two-door wagon
Bronco Wagon, 289 cu. in. V8, three-speed manual289 cu. in. V8Three-speed fully synchronized manualFull-roof two-door wagon

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service desk

What this car needs & when

Use this as a service-planning checklist for 1967 Ford Bronco Roadster, 289 cu. in. V8, three-speed manual. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.

Service topics
2
Scheduled topics
2
Applicability stated
2
Exact references
1

Before ordering Identify your engine, options and build date. Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

  • Engine oil and filterView intervals, applicability and sources

    Engine oil and filter

    Exact reference available

    Applies to: 1967 · United States · Chilton's 1981 Bronco guide prints this cadence for the 1966–1972 model-year band. It is a period secondary compilation acknowledged as based on Ford information, not a substitute for an exact vehicle's original owner literature.

    Published interval: 6,000 mi / 9,600 km / 6 months · Published 1966–1972 preventive-maintenance interval; whichever comes first.

    Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 37 — 1966–72, 6 months/6,000 miles: crankcase, change oil and filter · checked

    1967 cataloged Bronco engines

    K&N HP-3001

    Applies to: 1967 · 170 cu. in. inline-six, 289 cu. in. V8 · United States

    Source: K&N — Ford Bronco replacement oil-filter catalog · 1967 Ford Bronco engine application rows — HP-3001 · checked

    Verified ordering references

    • Service replacementK&N HP-3001

      Qty. 1 · Spin-on engine oil filter · catalog-listed

      K&N's manufacturer catalog lists HP-3001 for the 1967 Bronco 170 cu. in. inline-six or 289 cu. in. V8 application. Confirm the installed engine before ordering.

      Catalog: K&N — Ford Bronco replacement oil-filter catalog · 1967 Ford Bronco 170 cu. in. inline-six or 289 cu. in. V8 oil-filter application — HP-3001 · checked

      Search this part on Amazon
  • Chassis and driveline lubrication and level checksView intervals, applicability and sources

    Chassis and driveline lubrication and level checks

    Sourced interval available

    Applies to: 1967 · United States · Chilton's 1981 Bronco guide prints this cadence for the 1966–1972 model-year band. It is a period secondary compilation acknowledged as based on Ford information, not a substitute for an exact vehicle's original owner literature.

    Published interval: 6,000 mi / 9,600 km / 6 months · Centering yoke, steering linkage, U-joints and splines, with differential, transfer-case and transmission checks as equipped.

    Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 37 — 1966–72, 6 months/6,000 miles chassis/driveline rows · checked

Search results may cover different scales, trims and model years. Check each listing; this search does not establish an exact replica of the documented vehicle.

Sources

  1. Ford — 1967 Bronco factory brochure (FDT 6711)

Other 1967 configurations

Filter documented 1967 configurations →