2012 Ford Mustang Shelby GT500 Conv 6MT

Factory configuration

What this model is

Trim: Shelby GT500
Body style: Convertible
Engine: 5.4L supercharged DOHC V8
Transmission: TREMEC 6-speed manual

United States factory configuration. SVT performance and appearance packages are not separate configurations.

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service topics: 12
Factory intervals: 9
Fitment-scoped: 12
Exact references: 1

Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

Engine oil and filter
Sourced interval available
Shelby normal oil and filter
Whichever comes first. This engine does not use the V6/GT Intelligent Oil Life Monitor.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 7,500 mi / 6 months · Whichever comes first. This engine does not use the V6/GT Intelligent Oil Life Monitor.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 38, 41–42 · checked 2026-09-07
Shelby special-use oil and filter
For primarily extensive idling/low-speed commercial or dusty operation, whichever comes first. Extensive idling additionally requires service within 200 engine hours.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 5,000 mi / 6 months · For primarily extensive idling/low-speed commercial or dusty operation, whichever comes first. Extensive idling additionally requires service within 200 engine hours.
Source: Ford — 2012 Shelby GT500 Supplement · p. 47 · checked 2026-09-07
Engine oil filter
Exact reference available
Manufacturer application-catalog fitment only; this does not establish an oil-change interval.
Applies to: 2012 · US
Shelby GT500
Baldwin B329
Applies to: 2012 · 5.4L supercharged DOHC V8, 5.8L supercharged DOHC V8 (662 hp) · Shelby GT500 · US
Source: Baldwin Filters — Automotive Applications catalog (2017) · PDF page 227 — Ford 2012, Mustang supercharged Shelby row · checked 2026-09-01
Verified ordering references
- Service replacementBaldwin B329
  Qty. 1 · Engine oil filter · catalog-listed
  Baldwin's manufacturer application table lists this filter for the stated model year and engine. Confirm the VIN and installed engine before ordering.
  Catalog: Baldwin Filters — Automotive Applications catalog (2017) · PDF page 227 — Ford 2012, Mustang supercharged Shelby row · checked 2026-09-01
  Search this part on Amazon
Scheduled checks and inspections
Sourced interval available
Shelby tire rotation
Standard tires: side to side only, never front to rear or crisscross. Rotation is NOT recommended for the directional optional performance-package tires (P265/40-19 front, P285/35-20 rear).
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 5,000 mi · Standard tires: side to side only, never front to rear or crisscross. Rotation is NOT recommended for the directional optional performance-package tires (P265/40-19 front, P285/35-20 rear).
Source: Ford — 2012 Shelby GT500 Supplement · p. 18 · checked 2026-09-07
Shelby normal wheel inspection
Inspect wheel/related-component noise, wear, looseness or drag; whichever comes first. Tire rotation follows its separate rules.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 7,500 mi / 6 months · Inspect wheel/related-component noise, wear, looseness or drag; whichever comes first. Tire rotation follows its separate rules.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 41–42 · checked 2026-09-07
Shelby brake, cooling and chassis inspections
Inspect brakes/parking brake, coolant concentration/hoses, exhaust/heat shields and steering/ball joints/suspension/tie rods/driveshaft/U-joints; lubricate only grease fittings. Whichever comes first.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 15,000 mi / 12 months · Inspect brakes/parking brake, coolant concentration/hoses, exhaust/heat shields and steering/ball joints/suspension/tie rods/driveshaft/U-joints; lubricate only grease fittings. Whichever comes first.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 41–42 · checked 2026-09-07
Shelby special-use tire and wheel checks
Primarily idling or dusty operation: inspect tires/wheels and rotate only where permitted by the directional-tire limitation. Extensive idling also requires brake inspection and control-arm/steering-ball-joint lubrication if grease fittings exist.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 5,000 mi · Primarily idling or dusty operation: inspect tires/wheels and rotate only where permitted by the directional-tire limitation. Extensive idling also requires brake inspection and control-arm/steering-ball-joint lubrication if grease fittings exist.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 18, 47 · checked 2026-09-07
Shelby before-and-after-track service
The supplement calls for multi-point inspection and maintenance outlined in the 150,000-mile normal schedule before and after track use. Review the exact competition-preparation instructions and warranty limitations in the supplement with the servicing technician.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Source: Ford — 2012 Shelby GT500 Supplement · p. 35 · checked 2026-09-07
Monthly owner checks
Check engine oil, washer fluid, lights, tire wear and pressure including spare.
Applies to: 2012 · 3.7L Ti-VCT V6, 5.0L Ti-VCT V8, 5.0L Hi-Po Ti-VCT V8 (444 hp), 5.4L supercharged DOHC V8 · US
Published interval: 1 months · Check engine oil, washer fluid, lights, tire wear and pressure including spare.
Source: Ford — 2012 Mustang Owner’s Guide, third printing, USA · p. 330; Shelby p. 38 · checked 2026-09-07
Six-month owner checks
Check seat belts/latches, parking brake, warning lamps, coolant level/strength, battery connections, washer/wipers, hinges/latches/locks, weatherstrips and drain holes; clean/lubricate as needed.
Applies to: 2012 · 3.7L Ti-VCT V6, 5.0L Ti-VCT V8, 5.0L Hi-Po Ti-VCT V8 (444 hp), 5.4L supercharged DOHC V8 · US
Published interval: 6 months · Check seat belts/latches, parking brake, warning lamps, coolant level/strength, battery connections, washer/wipers, hinges/latches/locks, weatherstrips and drain holes; clean/lubricate as needed.
Source: Ford — 2012 Mustang Owner’s Guide, third printing, USA · p. 330; Shelby pp. 38–39 · checked 2026-09-07
Recommended multi-point inspection
At every scheduled visit check applicable fluid levels, tires/spare, exhaust, battery, horn/lights, cooling and A/C hoses, washer/wipers, windshield, leaks, air filter, applicable boots, suspension, steering/linkage, belts and clutch operation.
Applies to: 2012 · 3.7L Ti-VCT V6, 5.0L Ti-VCT V8, 5.0L Hi-Po Ti-VCT V8 (444 hp), 5.4L supercharged DOHC V8 · US
Source: Ford — 2012 Mustang Owner’s Guide, third printing, USA · p. 331; Shelby p. 39 · checked 2026-09-07
Cabin air filter
Sourced interval available
Shelby cabin-filter replacement
Replace if equipped every 15,000 miles. Inspect at intervening 7,500-mile/6-month columns (7,500/6, 22,500/18 and so on through 142,500/114).
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 15,000 mi · Replace if equipped every 15,000 miles. Inspect at intervening 7,500-mile/6-month columns (7,500/6, 22,500/18 and so on through 142,500/114).
Source: Ford — 2012 Shelby GT500 Supplement · pp. 41–43 · checked 2026-09-07
Engine air filter
Sourced interval available
Shelby engine air-filter replacement
Every 30,000 miles. Under extensive idling or dusty conditions inspect frequently and replace as required, including cabin filter.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 30,000 mi · Every 30,000 miles. Under extensive idling or dusty conditions inspect frequently and replace as required, including cabin filter.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 43, 47 · checked 2026-09-07
Fuel filter
Sourced interval available
Shelby fuel-filter replacement
Every 30,000 miles. For California-registered vehicles, failure to perform this item does not nullify the emissions warranty or limit recall liability during vehicle useful life; Ford still recommends the service.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 30,000 mi · Every 30,000 miles. For California-registered vehicles, failure to perform this item does not nullify the emissions warranty or limit recall liability during vehicle useful life; Ford still recommends the service.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 43, 50 · checked 2026-09-07
Spark plugs
Sourced interval available
Shelby spark plugs
Every 45,000 miles; retain this engine-specific interval.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 45,000 mi · Every 45,000 miles; retain this engine-specific interval.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 28, 43 · checked 2026-09-07
Coolant
Sourced interval available
Shelby initial coolant
First change, whichever comes first.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 105,000 mi / 72 months · First change, whichever comes first.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 38, 43, 51 · checked 2026-09-07
Shelby subsequent coolant
After the initial change, whichever comes first.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 45,000 mi / 36 months · After the initial change, whichever comes first.
Source: Ford — 2012 Shelby GT500 Supplement · pp. 38, 43, 51 · checked 2026-09-07
Drive belts
Fitment must be confirmed
Shelby accessory-belt service
Inspect at 105,000 miles and follow up at 120,000; at 150,000 replace if not replaced within the last 100,000 miles. Also inspect during recommended multi-point visits.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Source: Ford — 2012 Shelby GT500 Supplement · pp. 39, 43 · checked 2026-09-07
Transmission and transfer-case fluid
Sourced interval available
Shelby normal manual fluid
Every 150,000 miles; TREMEC six-speed manual only.
Applies to: 2012 · 5.4L supercharged DOHC V8 · TREMEC 6-speed manual · US
Published interval: 150,000 mi · Every 150,000 miles; TREMEC six-speed manual only.
Source: Ford — 2012 Shelby GT500 Supplement · p. 43 · checked 2026-09-07
Shelby dusty-use manual fluid
Every 50,000 miles when primarily dusty-road operation.
Applies to: 2012 · 5.4L supercharged DOHC V8 · TREMEC 6-speed manual · US
Published interval: 50,000 mi · Every 50,000 miles when primarily dusty-road operation.
Source: Ford — 2012 Shelby GT500 Supplement · p. 47 · checked 2026-09-07
Axle fluid
Fitment must be confirmed
Shelby synthetic axle exception
No routine change unless a leak is suspected, service is required or the axle is submerged; change after submersion. Separate high-speed/competition requirements apply.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Source: Ford — 2012 Shelby GT500 Supplement · pp. 31–32, 50 · checked 2026-09-07
Shelby high-speed or competition axle service
Replace rear-axle lubricant after the first hour of high-speed operation or competition use, then every 12 hours. Consult the supplement for competition preparation and warranty limitations.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Source: Ford — 2012 Shelby GT500 Supplement · p. 35 · checked 2026-09-07
Chassis lubrication
Sourced interval available
Shelby special-use U-joints
Primarily extensive idling or dusty operation: inspect and lubricate U-joints, whichever comes first.
Applies to: 2012 · 5.4L supercharged DOHC V8 · US
Published interval: 5,000 mi / 6 months · Primarily extensive idling or dusty operation: inspect and lubricate U-joints, whichever comes first.
Source: Ford — 2012 Shelby GT500 Supplement · p. 47 · checked 2026-09-07

Sources

Ford — 2012 Mustang sales brochure

2012 Ford Mustang Shelby GT500 Convertible 6MT

What this model is

Maintenance for this exact configuration

What this car needs & when

Sources