Car Model History

Two-door fastback · 426 cu in Street Hemi V8, dual 4-barrel carburetors (425 gross hp)

1966 Dodge Charger 426 Street Hemi V8

The 426 Street Hemi topped the first Charger range with either a four-speed manual or TorqueFlite automatic.

1966 Dodge Charger — B-body fastback, front three-quarter view
Exact 1966 Charger reference photograph; exact configuration not verified ·

Photo: “Dodge Charger (Centropolis Laval 2010)” by Bull-Doser / Wikimedia Commons — Public domain. Cropped to 16:9.

Factory configuration

What this model is

Trim
Charger
Body style
Two-door fastback
Engine
426 cu in Street Hemi V8, dual 4-barrel carburetors (425 gross hp)
Transmission
4-speed manual or 3-speed TorqueFlite automatic

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service desk

What this car needs & when

Use this as a service-planning checklist for 1966 Dodge Charger 426 Street Hemi V8. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.

Service topics
6
Factory intervals
5
Fitment-scoped
6
Exact references
1

Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

  • Carburetor air-cleaner element

    Sourced interval available

    Applies to: 1966 · United States · The exact 1966 Charger supplement explicitly adopts the 1966 Coronet maintenance requirements, adding only six-month lubrication of the Charger hood-release-handle pivot.

    Published interval: 24 months · Replace every two years; inspect/clean the element every second oil change and service oil-bath units annually.

    Source: Dodge — 1966 Charger and 426 Hemi factory service supplement plus referenced Dart/Coronet service manual (preserved by MyMopar) · 1966 Dart/Coronet Service Manual group 0, p. 0-4 — air-cleaner rows · checked

  • Engine performance evaluation

    Sourced interval available

    Applies to: 1966 · United States · The exact 1966 Charger supplement explicitly adopts the 1966 Coronet maintenance requirements, adding only six-month lubrication of the Charger hood-release-handle pivot.

    Published interval: 12,000 mi / 12 months · Whichever occurs first.

    Source: Dodge — 1966 Charger and 426 Hemi factory service supplement plus referenced Dart/Coronet service manual (preserved by MyMopar) · 1966 Dart/Coronet Service Manual group 0, p. 0-4 — engine-performance row · checked

  • Brakes and front wheel bearings

    Sourced interval available

    Applies to: 1966 · United States · The exact 1966 Charger supplement explicitly adopts the 1966 Coronet maintenance requirements, adding only six-month lubrication of the Charger hood-release-handle pivot.

    Published interval: 18,000 mi / 18 months · Inspect brake linings, linkage bushings, and front wheel bearings; whichever occurs first.

    Source: Dodge — 1966 Charger and 426 Hemi factory service supplement plus referenced Dart/Coronet service manual (preserved by MyMopar) · 1966 Dart/Coronet Service Manual group 0, p. 0-4 — 18-month/18,000-mile rows · checked

  • Transmission and rear-axle lubricant levels

    Sourced interval available

    Applies to: 1966 · United States · The exact 1966 Charger supplement explicitly adopts the 1966 Coronet maintenance requirements, adding only six-month lubrication of the Charger hood-release-handle pivot.

    Published interval: 6 months · Check every six months under normal service.

    Source: Dodge — 1966 Charger and 426 Hemi factory service supplement plus referenced Dart/Coronet service manual (preserved by MyMopar) · 1966 Dart/Coronet Service Manual group 0, p. 0-4 — six-month rows · checked

  • Chassis and Charger hood-release lubrication

    Sourced interval available

    Applies to: 1966 · United States · The exact 1966 Charger supplement explicitly adopts the 1966 Coronet maintenance requirements, adding only six-month lubrication of the Charger hood-release-handle pivot.

    Published interval: 6 months · Inspect steering, suspension, and universal joints and oil the Charger hood-release-handle pivot every six months; complete the specified joint lubrication at 36 months or 36,000 miles.

    Source: Dodge — 1966 Charger and 426 Hemi factory service supplement plus referenced Dart/Coronet service manual (preserved by MyMopar) · 1966 Charger supplement group 0 and Dart/Coronet Service Manual group 0, p. 0-4 · checked

  • Engine oil filter

    Exact reference available

    The order numbers below establish replacement-filter fitment only; they do not establish a service interval. Confirm the installed engine, VIN, build date, and filter dimensions before ordering.

    Applies to: 1966 · United States

    426 cu in Street Hemi V8, dual 4-barrel carburetors (425 gross hp)

    K&N HP-3001

    K&N publishes HP-3001 for this exact year-and-engine application; confirm VIN, build date, and installed filter dimensions before ordering.

    Applies to: 1966 · 426 cu in Street Hemi V8, dual 4-barrel carburetors (425 gross hp) · United States · Exact 1966 Charger engine application. Confirm VIN, build date, and installed filter dimensions before ordering.

    Source: K&N Engineering — Dodge Charger replacement-oil-filter application catalog · 1966 Dodge Charger 426 cu in application row — HP-3001 · checked

    Verified ordering references

Sources

  1. Dodge — 1966 Charger factory sales brochure (preserved scan)

Other 1966 configurations

Filter all 1966 configurations →