Car Model History

Four-seat 2+2 rear-wheel-drive fastback coupe · 2.8-liter L28E fuel-injected inline-six

1975 Nissan Z Datsun 280Z 2+2 Automatic

The U.S. 1975 280Z brochure identifies the long-wheelbase 2+2 body with this transmission choice.

1975 Datsun 260Z (S30) — red, front three-quarter view
Exact 1975 Z reference photograph; exact configuration not verified ·

Photo: “1975 Datsun 260Z Coupe (16171659517)” by Sicnag / Wikimedia Commons, licensed under CC BY 2.0. Cropped to 16:9.

Factory configuration

What this model is

Trim
280Z
Body style
Four-seat 2+2 rear-wheel-drive fastback coupe
Engine
2.8-liter L28E fuel-injected inline-six
Transmission
3-speed automatic

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service desk

What this car needs & when

Use this as a service-planning checklist for 1975 Nissan Z Datsun 280Z 2+2 Automatic. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.

Service topics
3
Factory intervals
2
Fitment-scoped
3
Exact references
3

Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

  • Engine oil filter

    Exact reference available

    Applies to: 1975 · 2.8-liter L28E fuel-injected inline-six · United States · The freely preserved factory service manual exposes these two replacement intervals; it repeatedly refers other work to a separate maintenance schedule, so no unshown interval is inferred.

    Published interval: 6,000 mi / 10,000 km · Factory service-manual replacement interval.

    Source: Datsun — 1975 280Z factory service manual maintenance instructions · Engine Lubrication section EL-9 — replace oil-filter element every 6,000 miles (10,000 km) · checked

    Verified ordering references

  • Fuel filter

    Exact reference available

    Applies to: 1975 · 2.8-liter L28E fuel-injected inline-six · United States · The freely preserved factory service manual exposes these two replacement intervals; it repeatedly refers other work to a separate maintenance schedule, so no unshown interval is inferred.

    Published interval: 25,000 mi / 40,000 km · Factory service-manual replacement interval.

    Source: Datsun — 1975 280Z factory service manual maintenance instructions · Engine Fuel section — replace fuel filter every 25,000 miles · checked

    Verified ordering references

  • Engine air-filter element

    Exact reference available

    Baldwin PA2121

    This manufacturer application record establishes replacement-filter fitment only; it does not establish a service interval.

    Applies to: 1975 · L28E · United States · Baldwin's pre-1980 Nissan table identifies the 280Z 2753cc (2.8L) FI application. Confirm the installed L28E engine, filter dimensions, and fuel-line fittings before ordering.

    Source: Baldwin Filters — Automotive Applications catalog (2017) · Printed catalog page 710, Nissan 1975 280Z 6-2753cc (2.8L) FI row — Air — PA2121 · checked

    Verified ordering references

Sources

  1. Datsun — 1975 280Z and 280Z 2+2 U.S. sales brochure

Other 1975 configurations

Filter all 1975 configurations →