Car Model History

Two-door short-wheelbase four-wheel-drive wagon · 302 cu. in. V8

1974 Ford Bronco, 302 cu. in. V8, three-speed manual

The Bronco offered Ford's optional 302-cubic-inch V8 with the standard synchronized three-speed manual.

1974 Ford Bronco 5.8 V8, first-generation compact 4x4 — front three-quarter view
Exact 1974 Bronco reference photograph; exact configuration not verified ·

Photo: “1974 Ford Bronco 5.8 V8” by Rutger van der Maar / Flickr, licensed under CC BY 2.0. Cropped to 16:9.

Factory configuration

What this model is

Trim
Bronco
Body style
Two-door short-wheelbase four-wheel-drive wagon
Engine
302 cu. in. V8
Transmission
Three-speed fully synchronized manual

Ford lists both manual and SelectShift Cruise-O-Matic choices with the V8.

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service desk

What this car needs & when

Use this as a service-planning checklist for 1974 Ford Bronco, 302 cu. in. V8, three-speed manual. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.

Service topics
2
Factory intervals
2
Fitment-scoped
2
Exact references
1

Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

  • Engine oil and filter

    Exact reference available

    Applies to: 1974 · United States · Exact 1974 cadence transcribed from Chilton's period 1973–1974 Bronco table; the source is a secondary compilation acknowledged as based on Ford information.

    Published interval: 6,000 mi / 9,600 km / 6 months · Whichever comes first.

    Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed pages 37–38 — 1974 crankcase oil/filter row · checked

    1974 cataloged Bronco engines

    K&N HP-3001

    Applies to: 1974 · 200 cu. in. inline-six, 302 cu. in. V8 · United States

    Source: K&N — Ford Bronco replacement oil-filter catalog · 1974 Ford Bronco engine application rows — HP-3001 · checked

    Verified ordering references

    • Service replacementK&N HP-3001

      Qty. 1 · Spin-on engine oil filter · catalog-listed

      K&N's manufacturer catalog lists HP-3001 for the 1974 Bronco 200 cu. in. inline-six or 302 cu. in. V8 application. Confirm the installed engine before ordering.

      Catalog: K&N — Ford Bronco replacement oil-filter catalog · 1974 Ford Bronco 200 cu. in. inline-six or 302 cu. in. V8 oil-filter application — HP-3001 · checked

      Search this part on Amazon

  • Brake system inspection

    Sourced interval available

    Applies to: 1974 · United States · Exact 1974 cadence transcribed from Chilton's period 1973–1974 Bronco table; the source is a secondary compilation acknowledged as based on Ford information.

    Published interval: 24,000 mi / 38,400 km / 24 months · Published 1973–1974 table interval.

    Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 38 — 24 months/24,000 miles: inspect brakes · checked

Sources

  1. Ford — 1974 Bronco factory brochure

Other 1974 configurations

Filter all 1974 configurations →