Full-roof two-door wagon · 302 cu. in. two-barrel V8 (205 gross hp)
1971 Ford Bronco Wagon, 302 cu. in. V8, three-speed manual
The Bronco Wagon could substitute Ford's optional 302-cubic-inch V8 while retaining the synchronized three-speed manual transmission.
Photo: “1971 Ford Bronco (28096997720).jpg” by Greg Gjerdingen from Willmar, USA / Wikimedia Commons, licensed under CC BY 2.0. Cropped to 16:9.
Factory configuration
What this model is
- Trim
- Bronco Wagon
- Body style
- Full-roof two-door wagon
- Engine
- 302 cu. in. two-barrel V8 (205 gross hp)
- Transmission
- Three-speed fully synchronized manual
The factory equipment table lists the optional 302 V8 and only the three-speed manual; it does not establish an automatic configuration.
Configuration-specific ownership
Maintenance for this exact configuration
These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.
Service desk
What this car needs & when
Use this as a service-planning checklist for 1971 Ford Bronco Wagon, 302 cu. in. V8, three-speed manual. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.
- Service topics
- 2
- Factory intervals
- 2
- Fitment-scoped
- 2
- Exact references
- 1
Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.
Engine oil and filter
Exact reference available
Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 37 — 1966–72, 6 months/6,000 miles: crankcase, change oil and filter · checked
1971 cataloged Bronco engines
K&N HP-3001
Source: K&N — Ford Bronco replacement oil-filter catalog · 1971 Ford Bronco engine application rows — HP-3001 · checked
Verified ordering references
- Service replacementK&N HP-3001
Qty. 1 · Spin-on engine oil filter · catalog-listed
K&N's manufacturer catalog lists HP-3001 for the 1971 Bronco 170 cu. in. inline-six (100 gross hp) or 302 cu. in. two-barrel V8 (205 gross hp) application. Confirm the installed engine before ordering.
Catalog: K&N — Ford Bronco replacement oil-filter catalog · 1971 Ford Bronco 170 cu. in. inline-six (100 gross hp) or 302 cu. in. two-barrel V8 (205 gross hp) oil-filter application — HP-3001 · checked
Search this part on Amazon
Chassis and driveline lubrication and level checks
Sourced interval available
Source: Chilton — Ford Bronco 1966–81 preventive-maintenance tables (1981 edition) · General Information and Maintenance, printed page 37 — 1966–72, 6 months/6,000 miles chassis/driveline rows · checked
Sources
Other 1971 configurations
- Bronco Wagon, 170 cu. in. six, three-speed manual
- Bronco Pickup, 170 cu. in. six, three-speed manual
- Bronco Pickup, 302 cu. in. V8, three-speed manual
- Sport Bronco Wagon, 170 cu. in. six, three-speed manual
- Sport Bronco Wagon, 302 cu. in. V8, three-speed manual
- Sport Bronco Pickup, 170 cu. in. six, three-speed manual
- Sport Bronco Pickup, 302 cu. in. V8, three-speed manual