Short-roof two-door pickup · 170 cu. in. inline-six (100 gross hp)

1968 Ford Bronco Pickup, 170 cu. in. six, three-speed manual

The Bronco Pickup used Ford's standard 170-cubic-inch inline-six and synchronized three-speed manual transmission.

Exact 1968 Bronco reference photograph; exact configuration not verified ·

Photo: “1968 Ford Bronco Pickup in Wimbledon White, Front Right (St. Ignace 2023).jpg” by Elise240SX / Wikimedia Commons, licensed under CC BY-SA 4.0. Cropped to 16:9.

Factory configuration

What this model is

Trim: Bronco Pickup
Body style: Short-roof two-door pickup
Engine: 170 cu. in. inline-six (100 gross hp)
Transmission: Three-speed fully synchronized manual

Ford's December 1967 brochure names five 1968 models, identifies the 170 six as standard and the 289 V8 as optional, and lists only a three-speed fully synchronized transmission.

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service topics: 3
Factory intervals: 3
Fitment-scoped: 3
Exact references: 1

Before orderingIdentify your engine, options and build date.Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

Engine oil and oil filter
Exact reference available
Applies to: 1968 · United States · Ford's 1968 Bronco sales brochure states the line-wide 6,000-mile maintenance cycle; detailed severe-use or time-based limits require the owner's manual.
Published interval: 6,000 mi / 9,600 km · Factory brochure interval; consult the owner's manual for severe-use or elapsed-time limits.
Source: Ford — 1968 Bronco factory brochure (TDM 6447) · Page headed 'We put more into Bronco' — 6,000-mile maintenance schedule · checked 2026-08-15
1968 cataloged Bronco engines
K&N HP-3001
Applies to: 1968 · 170 cu. in. inline-six (100 gross hp), 289 cu. in. two-barrel V8 (195 gross hp) · United States
Source: K&N — Ford Bronco replacement oil-filter catalog · 1968 Ford Bronco engine application rows — HP-3001 · checked 2026-09-01
Verified ordering references
- Service replacementK&N HP-3001
  Qty. 1 · Spin-on engine oil filter · catalog-listed
  K&N's manufacturer catalog lists HP-3001 for the 1968 Bronco 170 cu. in. inline-six (100 gross hp) or 289 cu. in. two-barrel V8 (195 gross hp) application. Confirm the installed engine before ordering.
  Catalog: K&N — Ford Bronco replacement oil-filter catalog · 1968 Ford Bronco 170 cu. in. inline-six (100 gross hp) or 289 cu. in. two-barrel V8 (195 gross hp) oil-filter application — HP-3001 · checked 2026-09-01
  Search this part on Amazon
Engine air cleaner — service
Sourced interval available
Applies to: 1968 · United States · Ford's 1968 Bronco sales brochure states the line-wide 6,000-mile maintenance cycle; detailed severe-use or time-based limits require the owner's manual.
Published interval: 6,000 mi / 9,600 km · Factory brochure interval; consult the owner's manual for severe-use or elapsed-time limits.
Source: Ford — 1968 Bronco factory brochure (TDM 6447) · Page headed 'We put more into Bronco' — 6,000-mile air-cleaner service · checked 2026-08-15
Chassis lubrication
Sourced interval available
Applies to: 1968 · United States · Ford's 1968 Bronco sales brochure states the line-wide 6,000-mile maintenance cycle; detailed severe-use or time-based limits require the owner's manual.
Published interval: 6,000 mi / 9,600 km · Factory brochure interval; consult the owner's manual for severe-use or elapsed-time limits.
Source: Ford — 1968 Bronco factory brochure (TDM 6447) · Page headed 'We put more into Bronco' — 6,000-mile chassis lubrication · checked 2026-08-15

Sources

Ford — 1968 Bronco factory brochure (TDM 6447)

Other 1968 configurations

Filter all 1968 configurations →