Two-door sedan · 1.8L fuel-injected M10 inline-four (101 hp)

1980 BMW 320i


The U.S.-market E21 continued as the 320i for 1980 with the emissions-era 1.8-liter M10.

1980 BMW 3 Series (E21, first generation) — front three-quarter view
Exact 1980 3 Series reference photograph; exact configuration not verified ·

Photo: “1980 BMW 3 (E21)” by Spanish Coches / Wikimedia Commons, licensed under CC BY 2.0. Cropped to 16:9.

Factory configuration

What this model is

Trim
320i
Body style
Two-door sedan
Engine
1.8L fuel-injected M10 inline-four (101 hp)
Transmission
Manual or automatic

Rear-wheel drive. BMW's archived material identifies the 320iS separately for this model year.

Compare related 1980 configurations

Compare up to twelve documented pairings, prioritizing the same engine, body, trim and gearbox as this car. This related selection is not a complete factory lineup.

Browse all documented 1980 configurations →

Compare 2 related configurations — current car marked
1980 BMW 3 Series: documented configuration differences
ConfigurationEngineTransmissionBody
Current carBMW 320i1.8L fuel-injected M10 inline-four (101 hp)Manual or automaticTwo-door sedan
BMW 320iS1.8L fuel-injected M10 inline-four (101 hp)ManualTwo-door sport sedan

Configuration-specific ownership

Maintenance for this exact configuration

These items are filtered to the engine, transmission, trim, and model-year applicability recorded for this configuration. Broad Amazon category searches are suppressed here; shopping links appear only beside catalog-backed part numbers.

Service desk

What this car needs & when

Use this as a service-planning checklist for 1980 BMW 320i. Start with the interval, confirm which engine or configuration you have, then use an exact ordering reference when one is verified.

Service topics
5
Scheduled topics
0
Applicability stated
5
Exact references
5

Before ordering Identify your engine, options and build date. Part numbers and sizes can change within one model year. Shopping links appear only for catalog-backed references; still verify the listing against your vehicle before ordering.

  • Engine air-filter elementView intervals, applicability and sources

    Engine air-filter element

    Exact reference available

    BMW 13 72 1 278 138

    Applies to: 1980 · M10 1.8L fuel-injected inline-four · 320i (E21) · United States · Exact 1980 catalog fitment only; this parts record does not establish a service interval. Confirm VIN and installed airbox before ordering.

    Source: BMW electronic parts catalog — 1980 320i (E21) genuine air-filter listing · Genuine 1980 BMW 320i Air Filter — part 13721278138 and supersession list · checked

    Verified ordering references

    • Original equipmentBMW 13721278138

      Qty. 1 · Engine air-filter element; current replacement for 13 72 1 261 012 and 13 72 1 271 254 · current

      The 1980-selected BMW catalog lists 13 72 1 278 138 for the E21 320i and identifies the two earlier numbers it replaces; confirm VIN and installed airbox before ordering.

      Catalog: BMW electronic parts catalog — 1980 320i (E21) genuine air-filter listing · Genuine 1980 BMW 320i Air Filter — part 13721278138 and supersession list · checked

      Search this part on Amazon
  • Front windshield-wiper blade setView intervals, applicability and sources

    Front windshield-wiper blade set

    Exact reference available

    BMW 61 61 9 069 195

    Applies to: 1980 · M10 1.8L fuel-injected inline-four · 320i (E21) · United States · Exact 1980 catalog fitment only; this parts record does not establish a replacement interval. Confirm the VIN and installed wiper arms before ordering.

    Source: BMWPartsDeal — exact-year 1980 BMW 320i front-wiper catalog listing · Genuine 1980 BMW 320i Wiper Blade — Front Windshield Wiper Blade Set 61619069195 and supersession list · checked

    Verified ordering references

    • Original equipmentBMW 61619069195

      Qty. 1 · Front · Front windshield-wiper blade set; current replacement for 61 61 1 362 189, 61 61 9 061 906, 61 61 1 365 883, and 61 61 1 365 991 · current

      The 1980-selected catalog lists this complete front set for the E21 320i. Confirm the VIN and installed wiper arms before ordering, especially if the car has been modified.

      Catalog: BMWPartsDeal — exact-year 1980 BMW 320i front-wiper catalog listing · Genuine 1980 BMW 320i Wiper Blade — Front Windshield Wiper Blade Set 61619069195 and supersession list · checked

      Search this part on Amazon
  • Air-conditioning compressor beltView intervals, applicability and sources

    Air-conditioning compressor belt

    Exact reference available

    BMW 64 55 1 722 991

    Applies to: 1980 · M10 1.8L fuel-injected inline-four · 320i (E21) with air conditioning · United States · Exact 1980 catalog fitment for an air-conditioning-equipped car only; this record does not establish a replacement interval or the separate alternator/water-pump belt. Confirm the VIN, installed compressor drive, and belt routing before ordering.

    Source: BMWPartsDeal — exact-year 1980 BMW 320i drive-belt catalog listing · Genuine 1980 BMW 320i Drive Belt — AC Belt 64551722991 and supersession list · checked

    Verified ordering references

    • Original equipmentBMW 64551722991

      Qty. 1 · Air-conditioning compressor drive · A/C belt; current replacement for 64 52 1 469 234, 64 55 1 469 267, 64 55 1 717 230, 64 55 1 722 990, and 64 52 1 276 096 · current

      Applies only when the car has the cataloged air-conditioning compressor drive; it is not the separate alternator/water-pump belt.

      Catalog: BMWPartsDeal — exact-year 1980 BMW 320i drive-belt catalog listing · Genuine 1980 BMW 320i Drive Belt — AC Belt 64551722991 and supersession list · checked

      Search this part on Amazon
  • Front brake pads and rear brake shoesView intervals, applicability and sources

    Front brake pads and rear brake shoes

    Exact reference available

    BMW 34 11 1 159 249 front; 34 21 1 160 165 rear

    Applies to: 1980 · M10 1.8L fuel-injected inline-four · 320i (E21) · United States · Exact 1980 catalog fitment only; replace friction material according to measured wear and hardware condition. Confirm the VIN and installed front calipers/rear drums before ordering.

    Source: BMWPartsDeal — exact-year 1980 BMW 320i brake-pad and shoe catalog listing · Genuine 1980 BMW 320i Brake Pads — Front Brake Pad Set 34111159249 and rear Brake Shoe Lining Repair Kit 34211160165 · checked

    Verified ordering references

    • Original equipmentBMW 34111159249

      Qty. 1 · Front axle · Asbestos-free front brake-pad set; replaces 34 11 1 150 527, 34 11 1 150 523, 34 11 1 118 517, and 34 11 1 150 524 · current

      One cataloged front-axle set; confirm the installed calipers and inspect rotors and hardware before ordering.

      Catalog: BMWPartsDeal — exact-year 1980 BMW 320i brake-pad and shoe catalog listing · Genuine 1980 BMW 320i Brake Pads — Front Brake Pad Set 34111159249 and supersession list · checked

      Search this part on Amazon
    • Original equipmentBMW 34211160165

      Qty. 1 · Rear axle · Asbestos-free rear brake-shoe lining repair kit; replaces 34 21 1 121 586, 34 21 1 108 430, and 34 21 1 111 484 · current

      One cataloged rear-axle shoe kit; confirm the installed drums and inspect cylinders and hardware before ordering.

      Catalog: BMWPartsDeal — exact-year 1980 BMW 320i brake-pad and shoe catalog listing · Genuine 1980 BMW 320i Brake Pads — rear Brake Shoe Lining Repair Kit 34211160165 and supersession list · checked

      Search this part on Amazon
  • Engine oil filter — catalog fitmentView intervals, applicability and sources

    Engine oil filter — catalog fitment

    Exact reference available

    Applies to: 1980 · United States

    1.8L fuel-injected M10 inline-four (101 hp) — K&N HP-1002

    K&N HP-1002

    Manufacturer-catalog replacement-part fitment only; it does not establish a BMW service interval. Confirm the VIN, production date, engine, and installed filter dimensions before ordering.

    Applies to: 1980 · 1.8L fuel-injected M10 inline-four (101 hp) · 320i · United States · Exact model-year and engine-family catalog scope; verify VIN and production date before ordering.

    Source: K&N — BMW 320i replacement oil-filter catalog · 1980 BMW 320i 1.8L/2.0L gasoline — HP-1002 · checked

    Verified ordering references

    1.8L fuel-injected M10 inline-four (101 hp) — K&N HP-1002

    K&N HP-1002

    Manufacturer-catalog replacement-part fitment only; it does not establish a BMW service interval. Confirm the VIN, production date, engine, and installed filter dimensions before ordering.

    Applies to: 1980 · 1.8L fuel-injected M10 inline-four (101 hp) · 320iS · United States · Exact model-year and engine-family catalog scope; verify VIN and production date before ordering.

    Source: K&N — BMW 320i replacement oil-filter catalog · 1980 BMW 320i 1.8L/2.0L gasoline — HP-1002 · checked

    Verified ordering references

Search results may cover different scales, trims and model years. Check each listing; this search does not establish an exact replica of the documented vehicle.

Sources

  1. BMW of North America — 320iS heritage in the 2011 model-year update
  2. BMW of North America — new BMW 3 Series Sedan and Sports Wagon technical release

Other 1980 configurations

Filter documented 1980 configurations →